Product Details
|
Evadur? High Flow, High Purity Membrane Cartridge
編號：
Evadur? High Flow, High
Purity Membrane Cartridge
Purity Membrane Cartridge
Evadur? High Flow, High
Purity Membrane Cartridge
Evadur? is a high purity polyethersulfone membrane
cartridge designed specifically for demanding water
and chemical filtration applications. Evadur offers a
unique pleat design and rugged construction for
superior retention and filter life. The hydrophilic
polyethersulfone membrane resists a wide variety of
chemicals. Evadur achieves very high flow rates while
maintaining a very low differential pressure. Evadur
has also been designed to have extremely fast “flushup”
or clean up times. Rely on Evadur for your high
flow, high purity membrane applications.
Applications
■ Pre and post RO filtration
■ Point-of-use filtration
■ Bottled water
■ Specialty chemical
Features and Benefits
■High bacterial retention.
■Complete product offering from 0.03 to
0.65 microns.
■High purity polypropylene support structures.
■Thermally bonded to exclude liquid capture
and extractables.
■All materials biosafe in accordance with USP
Class VI-121°C Plastic Test.
■All materials listed as acceptable for potable and
edible contact according to CFR Title 21.
■Manufactured in a zone Class 10 clean room.
■Manufactured with strict quality control
measuring rinse-up, integrity testing, flow
rate, and extractable levels.
■Parker Process Filtration Division is an
ISO9000:2000 Certified Division.
Specifications
Materials of Construction:
■ Membrane: hydrophilic
polyethersulfone
■ Membrane Support/Drainage:
polypropylene
■ Structural components: polypropylene
■ Seal Material: various
Dimensions:
■ Diameter: 2.7 in (6.8 cm)
■ Lengths: 10-40 in (25-102 cm)
Recommended Operating Conditions:
■ Maximum Temperature:
176°F (80°C) @ 30 ΔP (2.1 bar)
■ Maximum Differential Pressure:
Forward:
70 psi (4.8 bar) @ 77°F (25°C)
30 psi (2.1 bar) @ 176°F (80°C)
Reverse:
50 psi (3.4 bar) @ 77°F (25°C)
■ Sealing Method: thermal welding
Sterilization/Sanitization Methods:
■ Isopropyl Alcohol
■ Sodium Hydroxide
■ Hydrogen Peroxide
■ Hot Water: 190°F (88°C)
@ 5 psid (0.3 bar)
■ Autoclave: 250°F (121°C) for
30 minutes at 15 psi (1.0 bar)
■ In Situ Steam: 284°F (140°C)
for 60 minutes at 15 psi (1.0 bar)
■ Chlorine
■ Sodium Hypochlorite
■ Sanitizing Agents (see Materials
Selection Guide, Bulletin C-770)
Installation Rinse-In:
■ Cartridges typically rinse to back
ground resistivity in less than six
minutes at 3.5 gpm/10" equivalent
